October 2017

cgdi-prog-bmw-f31-key-program (2)

CGDI PROG BMW program F31 smart key FEM

CDDI PROG can program keys to BMW CAS1, CAS2, CAS3, CAS3+, FEM, BDC. Here, i will display how to use CGDI PROG BMW for F31 FEM remote programming. Remote: 868 Chassis: F020 BMW F31 FEM Voltage…


BMW_ENET__Ethernet_to_OBD_

BMW E-sys ENET vs Carly for BMW

Which better for BMW F series coding: BMW E-sys ENET or Carly for BMW? Look here: Carly: not for coding; E sys: coding success I have been using Carly on my F30 for over a year,…



bmw icom software

How to use WinKFP for FRM3 flash

This WinKFP job was done with ICOM A2 emulator for FRM3 flash after FRM3 repair/reflash by Xprog-m or other programmer the like. After FRM3 was repaired, then need to flash the correct software in FRM3 module. The…