How to update BMW ICOM NEXT firmware 3.14.10 3.14.08

Notice! BMW ICOM NEXT newest firmware 3.14.10 is available. But there are still many folks confuse about how to update ICOM NEXT A+B+C firmware. This blog will show you the update tutorial.

ICOM NEXT firmware 3.14.10 Download link:

https://mega.nz/#!uZ0XgTbB!0pW25mgpiUuhB2K5gBIxw9O-Yj65aQ1Jh50RdKAD4Is

ICOM NEXT firmware 3.14.08 Download link:

https://mega.nz/#!D0cwTTzb!LCeRki-jObvuV9m6UaRsxiGCuHlwv-u33ShJO4ZGXaQ

ICOM Image 03.14.08 (Application image+ Firmware image+ ICOM NEXT app .tar.gz+ ICOM NEXT rootfs. tar.gz)

https://mega.nz/#F!zZUXiYpI!H9-RKjfqd4Mjk9EoWMlxLw

How to update BMW ICOM NEXT firmware?

There are two optional ways for you: one is using ISTA-D, another is by MSI Installer and Web interface.

  1. Update BMW ICOM NEXT firmware via ISTA-D tutorial:

First, install ISTA-D software on your system so you can use it to install the firmware on your ICOM.

Next, start ISTA-D with ICOM connected to your car (Don’t need KL15, KL30 13.8V on pin 16 and ground on 4+5 is enough)

Then, go to connection manager and start the update.

How to get to the ISTA connection manager?

You can click on the button as following picture shows:

icom-next-manager-2

  1. Update BMW ICOM NEXT firmware via WIS Installer tutorial:

First, install the MSI installer

Next, find the system and application firmware file (.bin for ICOM A1/A2 and .tar.gz for ICOM NEXT) in your installed folder, System = ICOM Next-rootfs-XXXXXX. tar.gz, Application = ICOM Next-app-XXXXXX. tar.gz

Then, upgrade the ICOM firmware by web interface.

Note: For BMW ICOM NEXT firmware, the tarball is in C:\ProgramData\BMW\ISPI\data\TRIC\ICOMNext after you installed the MSI installer.

ICOM NEXT firmware 3.14.10 is tested on forum. Here is feedback for your reference:

I test it this morning on a CIC of an E90 and an E60. And now also ICOM NEXT is flashing like HELL. So the bug of slow flashing CICR is gone with this upgrade. This I can confirm. THANK, it was long waiting but it was worth it.