ICOM A2 A1 fw 1.40.05 download and update procedure

BMW ICOM APPLICATION 1.40.05 and SYSTEM version 01.25.02 is verified working well. Following is about upgrade procedure and tips.

update firmware-01

ICOM A2 A1 fw 1.40.05 compatible software:

To run ICOM, ICOM A1 and common ICOM A2 with the newest ISTA-D Rheingold ISTA-P 2015.11, user is required to update firmware to the newest version.

Current SYSTEM IMAGE version: 01.25.02

Current APPLICATION IMAGE version: 1.40.05

APPLICATION 1.40.05 and SYSTEM version 01.25.02 compatible ICOM hardware:

APPLICATION 1.40.05 and SYSTEM version 01.25.02 is tested working fine with both perfect version ICOM A2 and common version ICOM A1 A2.

Perfect version ICOM A: item NO SP168-BA and SP168-BO

Common version ICOM A1, A2: item NO SP168-C, SP168-B, SP168 and SP168-D

All BMW ICOM list: http://www.uobdii.com/producttags/bmw-icom_p2.html

APPLICATION 1.40.05 and SYSTEM version 01.25.02 free download at:

http://www.chinaautodiag.com/download/icom-application-image-01-40-05-bootimage-01-25-02.zip

ICOM firmware updates procedure and tips:

ICOM fw 1.40.05/01.25.02 update procedure:

  1. Please use internet cable to connect ICOM (including all available ICOM) with computer, and plug 12V power adapter to super ICOM A2 to supply power or connect ICOM to BMW vehicle for power.
  1. Unzip perfect ICOM A1 A2 fw 1.40.05 upgrade files.

1) Perfect version ICOM A: Open IE Internet Explorer, enter address http://169.254.33.45:60080/, log in with username/password: root/NZY1150263

2) Common version ICOM A2 A1: browse http://169.254.92.38:60080/ and username/password: root/NZY11502.

Following picture is perfect version ICOM A fw 1.40.0/ 01.25.02 login inform.

root-02

For the following operation procedure, both common ICOM and super version ICOM are the same.

  1. Click “Update Firmware”, you will see ICOM firmware version information.

update firmware-03

  1. Click “Browse” to select file “ICOM-BootImage-01-25-02.bin”, set image type as “SYSTEM”, click “Send the file”.
  1. When you get message “Write the image file to the flash?” click “Yes”, then ICOM indicator light will turn red.
  1. When you get message “The SYSTEM IMAGE update was successful”, click “Update Firmware”.

click update firmware-4

  1. Choose ” ICOM-ApplicationImage-01-40-05.bin”, set image type as “APPLICATION”, click “Send the file”, it will cost several minutes please be patient to upload.
  1. When you get message “Write the image file to the flash?” click “Yes”, then the ICOM indicator light will turn red for the second times.
  2. When it finish upgrading, click “reboot”.
  1. Click “Home” – “Update Firmware”, you will find ICOM A2 firmware update to the newest version:

Current SYSTEM IMAGE version: 01.25.02

Current APPLICATION IMAGE version: 1.40.05

Additional Note:

Please be sure your computer is to obtain IP address automatically.