Yanhua BMW FEM BDC key programmer read write engine ISN via OBD

yanhua-bmw-fem-bdc-v1.0.5-read-engine-isn-via-obd-03

OBD read write BMW FEM/BDC engine ISN on most N20, N13, N55 is possible with Yanhua BMW FEM /BDC key programmer V1.0.5.

 

Guide: Yanhua BMW FEM / BDC V1.0.5 read write engine ISN via OBD

Click on “Connect” then “OBD read / write engine ISN”

yanhua-bmw-fem-bdc-v1.0.5-read-engine-isn-via-obd-01

 

Executing read DME ISN code…and then read out version

yanhua-bmw-fem-bdc-v1.0.5-read-engine-isn-via-obd-02

 

Pops up “ISN – DME/DDE [MEVD1725_N13]” and “Execute read DME ISN code success”.

yanhua-bmw-fem-bdc-v1.0.5-read-engine-isn-via-obd-03

 

Click on “Write” to have new DME ISN code and wait until writing succeed, click on “Close”.

yanhua-bmw-fem-bdc-v1.0.5-read-engine-isn-via-obd-04

 

One more time, click on “OBD read / write engine ISN” to read out the new ISN code, wait until you see the message “Execute read DME ISN code success”

yanhua-bmw-fem-bdc-v1.0.5-read-engine-isn-via-obd-05

Done!

Yanhua BMW-FEM/BDC V1.0.5 read and write DME ISN code succeed.